Cip series

100 series
Medium weave fabric with excellent mechanical strength.

200 series
Medium weave fabric(100 series) crosswoven with PTFE for a low coefficient of friction. (Wrapped with series 100 material for walls over 1/4 inch.(6.35mm))

300 series
High temperature fabric that can operate into the 400° (204° C) range while maintaining it’s high compressive strength.

400 series
Medium weave fabric (100 series) cross woven with a PTFE textile for a low coefficient of friction in thin wall bearings. No additional series wrap used.

Solid lubricants
All above series of CIP Composites are available with solid lubricants incorporated. These can be graphite, MOS2, or PTFE evenly dispersed throughout the material. These materials are recommended for use where other forms of lubricants are undesirable, erratic or nonexistent. These solid lubricants can substantially improve performance where maintenance of wet lubrication films is difficult.

 
CIP Material codes
Fabric Series  
Polyester = 1

Poly & PTFE

 = 2

Nomex

 = 3

PTFE

 = 4
   
Additive  
None            = 0
Graphite       = 1
Moly = 2
PTFE            = 3
G & P            = 4
M & P            = 5
   
Resin  
Standard     = 1
Marine         = 2
High Temp  = 3
Advanced    = A
Performance  
Advanced    = B
Performance Plus  

Example: Polyester cloth, molylubrication additive, polyester resin and Advanced Performance A =Series 121A

 

Advanced performance CIP material
(example: 101a or 101b)
CIP’s Advanced Performance material incorporates an additive that strengthens the resin to
enhance physical and mechanical properties. Dry lubricants may be used with this additive.
Advanced Performance Plus combines this additive with a lubricating enhancer.